Ford Everest – Paint Repair And Dura-Seal Ultra

Left side guard badge

Detail – Chip Repairs + Ultra Ceramic

Full paint surface detailing cut and polish restored the shine and glow of this late model, Ford Everest. The magic of our approved applicators comes into its own when the full service is performed, from a thousand small white stone chip dots to a smooth colour correct blended paint chip repair that neatly masks the paint chip.

Finishing the paint surface reconditioning and stone chips repairs off with a lasting high-gloss ceramic paint protection coating from the Dura-Seal ceramic coatings range – Dura-Seal Ultra.

Application performed by | Hamilton

Close up of left rear tail light and side

Ceramic Paint Protection

Front and right side after application of coating

The Process

Deep surface clean with our environmental pollution remover, full paint surface cut and polish with paint stone chip repairs and protected with Dura-Seal Ultra ceramic paint protection.

 

 

Full Commitment

Our approved applicators are respected for their commitment to providing the best results.

Full paint detailing and restoration requires a specific process. Dedicated to correction and preservation of the clear coat. Before any cutting and polishing can begin, there’s the matter of removing environmental pollution build up and exposing the clear coat for correction.

  1. Clean back the heavy dirt items.
  2. Apply environmental pollution remover.
  3. Wipe away pollutants exposing clear coat.
  4. Cut Polish Clarity Refine and Chip Repair.
  5. Protect clear coat, sealant or wax.

Various techniques are used to check and recheck the finish to ensure the defects have been rectified. If you would like the best treatment on your vehicle feel free to contact us.

There is hope

A quality cut polish, paint detailing can remove these fine lines. Followed up with a ceramic coating to help reduce occurrences can provide for years of shiny reflective surface.

If your cars an appreciating classic admired by many or it’s a regular traveler, you can feel confident in knowing that our approved applicators have been there, caring for the cars they work on as if they were their own. Their processes are designed to help improve and maintain the integrity of the factory finish while protecting and enhancing the look and feel.

Coating & After Care

Application of Dura-Seal Ultra for easy-cleaning. Wash with a quality product like Optimum ONR and Opti-Clean.  Ensure that you wash the vehicle when its cool to the touch and always fully dry the vehicle off. Drying off the vehicle elminates mineral water-spotitng.

Close up front right guard looking back
Reflections on right side after ceramic coating applied

Contact

I Am Interested In

Close up of rear Ford Everest badge after coating applied

Follow US