Ford BOSS 355 Full Detail and Ceramic Paint Protection

Lights reflecting on bonnet after ceramic coating application

Cut Polish + Dura-Seal Ultra

Flat black Ford 355 GT with deep blue pearl effect in the paint underwent a full paint detailing three stages corrective cut and polish to remove many wash marks. A classic in the making with many admirers, the paint surface restored from a grey-black look to a deep rich liquid black, with the addition of the Dura-Seal Ultra ceramic paint coating adding depth and gloss while preventing the black from blooming to grey.

Our approved applicators are skilled in providing full paint surface detailing in preparation for ceramic coatings to protect modern classics.

Restoration & Application performed by | Invercargill

Close of front right BOSS 355 decal

Restored & Protected

Front right BOSS 355 decal looking forwards

The Process

Full paint clean and detailing with fine lines and scratches removed. Application of Dura-Seal Ultra.



Full Commitment

Our approved applicators are respected for their commitment to providing the best results.

Full paint detailing and restoration requires a specific process. Dedicated to correction and preservation of the clear coat. Before any cutting and polishing can begin, there’s the matter of removing environmental pollution build up and exposing the clear coat for correction.

  1. Clean back the heavy dirt items.
  2. Apply environmental pollution remover.
  3. Wipe away pollutants exposing clear coat.
  4. Cut Polish Clarity Refine and Chip Repair.
  5. Protect clear coat, sealant or wax.

Various techniques are used to check and recheck the finish to ensure the defects have been rectified. If you would like the best treatment on your vehicle feel free to contact us.

There is hope

A quality cut polish, paint detailing can remove these fine lines. Followed up with a ceramic coating to help reduce occurrences can provide for years of shiny reflective surface.

If your car’s an appreciating classic admired by many or it’s regular traveler, you can feel confident in knowing that our approved applicators have been there, caring for the cars they work on as if they were their own. Their processes are designed to help improve and maintain the integrity of the factory finish while protecting and enhancing the look and feel.

Coating & After Care

Application of Dura-Seal Ultra for easy-cleaning. Wash with a quality product like Optimum ONR and Opti-Clean.  Ensure that you wash the vehicle when its cool to the touch and always fully dry the vehicle off. Drying off the vehicle elminates mineral water-spotitng.

Rear wing after application of ceramic coating
Low down looking back over front right and bonnet


I Am Interested In

Left side and rear door

Follow US